Best Powered Speakers for a Turntable (Easy Setups That Sound Great)
This post contains affiliate links. As an Amazon Associate, Retro Tech Gadgets earns from qualifying purchases. If you buy through one of our links we may earn a small commission at no extra cost to you. Read our full disclosure.
You bought a turntable. Now you need something to hear it through, and this is where a lot of people get stuck. Receivers, amps, passive speakers, preamps. It sounds like a lot.
It doesn’t have to be. Powered speakers have the amplifier built in. Plug the turntable into the speakers, plug the speakers into the wall, done. For most people that’s the right answer.
Quick Picks at a Glance
| Product | Best For | Deal |
|---|---|---|
| Edifier R1280DB | Best budget pick | Check price |
| Kanto YU4 | Best with a built-in phono preamp | Check price |
| Klipsch R-41PM | Best for punchy sound | Check price |
| Audioengine A2+ | Best for small spaces | Check price |
| Audioengine A5+ | Best for filling a room | Check price |
The One Thing to Check First: The Phono Preamp
Turntables put out a very quiet signal that needs a phono preamp to boost it. Most beginner turntables have one built in (often with a switch on the back labeled PHONO/LINE). If yours does, set it to LINE and any powered speakers will work.
If your turntable doesn’t have a preamp, either buy speakers with one built in (I’ve marked those below) or add a cheap phono preamp between the two.
The Best Powered Speakers for a Turntable
1. Edifier R1280DB
Best for: Best budget pick
The speakers I recommend most to people starting out. Wood finish, warm sound, Bluetooth for when you want to stream, and a price that leaves room in the budget for records. No phono preamp, so your turntable needs one built in.
2. Kanto YU4
Best for: Best with a built-in phono preamp
Plug a turntable without a preamp straight in. Good sound, Bluetooth, and a nice clean look. This is the easiest all-in-one setup on the list.
3. Klipsch R-41PM
Best for: Best for punchy sound
Klipsch speakers have a lively, detailed sound that makes rock and vinyl from the 70s jump out. These have a built-in phono preamp too, so they work with almost any turntable.
4. Audioengine A2+
Best for: Best for small spaces
Small enough for a desk or a bookshelf, and they sound bigger than they look. No phono preamp, so pair them with a turntable that has one.
5. Audioengine A5+
Best for: Best for filling a room
The bigger sibling. More bass, more volume, and enough power for a living room. If you have the space and the budget, these are a real step up.
Placement Tips That Make a Big Difference
Keep the speakers off the same surface as the turntable if you can. Bass vibrations travel through furniture and can make the needle skip. Put them at ear height, a few feet apart, and angle them slightly toward where you sit. If your record player is skipping, our skipping fix guide covers the rest.
My Pick
For most people, the Edifier R1280DB with an Audio-Technica AT-LP60X is the best starter setup going. If your turntable has no preamp, grab the Kanto YU4 instead and skip the extra box.
FAQ
Can you connect powered speakers directly to a turntable?
Yes, as long as either the turntable or the speakers have a built-in phono preamp.
Do I need a receiver for a turntable?
No. Powered speakers have the amplifier built in, so you can skip the receiver entirely.
What’s a phono preamp?
A small amplifier that boosts a turntable’s very quiet signal up to a normal level so speakers can play it.
Are Bluetooth speakers good for a turntable?
They work, but wired powered speakers usually sound better and have no lag or dropouts.
Where should I put speakers next to a turntable?
Ideally on separate stands or furniture, so bass vibrations don’t travel into the turntable and cause skipping.
